Draft preview. Dashed yellow boxes are things only you can fill in: real photos, ratings, rates and legal details. On the live site they stay hidden until filled.

Get a price

Madhapur, Hyderabad · Own CNC and PU booth

Carved mandirs, walls and doors, PU-finished in Hyderabad.

We cut on our own CNC and spray in our own PU booth, so the piece reaches your wall finished. Every price is fixed before you book, and ₹1,000 holds your slot.

See designs and prices Get price on WhatsApp
  • Own factory in Bollaram: CNC and PU booth
  • Price fixed before you book
  • You approve the cut preview first

తెలుగులో కూడా మాట్లాడవచ్చు · WhatsApp +91 83673 93001

3D model of the Venkateswara Swamy backdrop: black PU idol in a carved arch with Lakshmi, shankha and chakra in gold
Venkateswara Swamy backdrop · HDHMR · 3D relief · mirror-black PU with gold This is a 3D render. You asked for renders rather than photos of the real idol; swap in an installed photo here whenever you want.
Own CNC router
3-axis, 8 × 4 ft bed, at our Bollaram factory
Own PU spray booth
Matte, high gloss and metallic
You approve first
Cut preview on WhatsApp before we cut
₹1,000 holds your slot
Adjusted in your final bill

Collections

Carved walls, finished in your shade.

Each piece is cut from 18 to 25 mm board on our CNC, then primed and sprayed in PU. Pick a size and a finish. The price shown is the price you pay, plus GST. [[ Say what the price includes: delivery and fixing in Hyderabad? Typical lead time? ]]

3D model of the Venkateswara Swamy backdrop: black PU idol in a carved arch with Lakshmi, shankha and chakra in gold
Signature · made to order

Venkateswara Swamy Backdrop

Sri Venkateswara in full 3D relief inside a carved arch, with Lakshmi, shankha and chakra in gold. Our PU team spends fifteen days on the mirror-black finish.

HDHMR · 3D relief · made to your pooja wall

On quote

Doors and rafters

Carved doors, fluted walls.

Door skins carved in 3D on HDHMR and cut to your frame, and rafter sheets cut from full 8 × 4 ft sheets. Prices are before packing and GST.

Doors

Rafter sheets

Door prices are for one 3 × 7 ft skin in 18 mm HDHMR. Rafter prices are worked from our rate card for a full 8 × 4 ft sheet.

3D studio

Turn it in your hand.

Drag to rotate. Pick a piece, a PU shade and a sheen, and see how light falls into the carving before you order.

Drag to rotate

Venkateswara Swamy

Piece
PU shade ·
Sheen

Handles

Handles that match the wall.

Cut from the same patterns as our panels and sprayed in the same PU shades, so a wardrobe can match the mandala wall beside it. Standard hole centres, so they fit any shutter.

Teak or HDHMR, carved on one face and PU finished. Prices are per piece, plus GST. Screws included.

Book a CNC

Your design, our machine, a fixed price.

Bring a DXF, a sketch or a photo. Enter the size in feet and inches and you see the full price before you book. ₹1,000 reserves your machine slot and is adjusted in the final bill.

  1. Size itEnter the job and see the price.
  2. Book the slotPay ₹1,000 to reserve machine time.
  3. Approve the previewWe send the toolpath preview before cutting.
  4. Pay and collectPay the balance. Collect, or we deliver.

Job card

Example loaded: an 8 × 8 ft jaali wall on two sheets
ft
in
ft
in
pcs

Enter the size in feet and inches. Boards come in 8 × 4 ft sheets, so you pay for the full sheets your design uses. 50 mm is two 25 mm boards pressed together. 3D relief needs 12 mm or thicker. Acrylic is cut raw, without PU.

[[ CNC carving rates and board prices are still samples. Send your real rates and they replace these everywhere. ]]

Reserve your machine slot

Send the job and we open WhatsApp with it filled in. We check your file, confirm your date and send a ₹1,000 payment link there.

We use your name, number and area only to reply to this request on WhatsApp or by phone. Privacy policy

₹1,000 is adjusted in your final bill, and you approve the cut preview before we cut. [[ When is the ₹1,000 refunded? ]] Refunds and cancellation

Rate card and what our machine does

Rate card

Board is charged by the full 8 × 4 ft sheet, so an 8 × 8 ft design uses two sheets. CNC carving and PU are charged on the design area; PU counts 1.5 times the area for 2D work and 2.5 times for 3D relief, because carved faces take more coats. Packing is 5% of the bill, and GST 18% is added on top.

Board price per 8 × 4 ft sheet
* 50 mm is two 25 mm sheets pressed together, plus ₹1,000 pressing per sheet.

CNC carving, per sq ft

PU finish, per sq ft

Other charges

What our machine does

Machine
3-axis CNC router
Largest piece
One 8 × 4 ft sheet. Bigger work is carved as panels and joined on site.
Board thickness
3 to 25 mm, or 50 mm as two 25 mm boards pressed together
Finest detail
⅛ in (3 mm), set by our smallest bit
3D relief
One face only, on 12 mm board or thicker. No undercuts.
Billing
Board by the full sheet. Carving and PU by area, minimum 1 sq ft per piece.

Questions

Before you book.

Straight answers on board, finish, delivery and money. Ask anything else on WhatsApp.

What happens to my ₹1,000?

It holds your machine slot and is adjusted in your final bill. [[ Say when it is refunded, e.g. in full if we cannot cut your design, or if you cancel before cutting starts. ]]

What if the cut does not match what I wanted?

We send you the toolpath preview on WhatsApp and cut only after you approve it. [[ Your redo policy if a piece does not match the approved drawing. ]]

MDF or HDHMR: which should I choose?

HDHMR is denser and handles moisture better, so it suits doors and pieces near water. MDF carves crisply and suits dry walls and panels. We name the board on every quote.

Will it get termites or swell with moisture?

PU seals the carved face and edges, which keeps moisture out. Keep carved pieces off wet floors and away from direct water. [[ Confirm the board brand and whether it is sold as termite resistant, and any warranty you give. ]]

How do I clean a PU finish?

Dust with a soft dry cloth and wipe marks with a damp one. Avoid harsh cleaners and scrubbers on gloss and gold. [[ Confirm, and add your finish warranty. ]]

How long does it take?

Cutting is booked by slot. PU needs time to cure: the mirror-black Venkateswara finish alone takes about fifteen days. [[ Typical lead times for a mandir backdrop, a door and a rafter wall. ]]

Do you deliver and fix in Hyderabad?

You can collect from us, or we deliver. [[ Confirm: is fixing included, and what does delivery cost in Hyderabad? ]]

Do I get a GST bill?

Prices on this site are plus 18% GST, and the GST is shown on your bill. [[ Confirm a GST invoice is issued for every order, and add your GSTIN to the footer. ]]

Which wall should the mandir go on?

Many families follow Vastu and choose a north-east corner. Tell us the wall you have chosen and we size the backdrop to it.

Can I see the work before I order?

Ask on WhatsApp and we send photos and videos of similar pieces from our CNC and PU booth at our Bollaram factory. [[ Can customers visit the factory, and when? ]]

Our mark, as we would cut it in 8 mm acrylic.

Atelier

कलाकृति

Kalakrti means a work of art. We are a design studio with our own CNC router and PU spray booth under one roof, so the piece that leaves the machine reaches your wall finished.

From pattern to wall

  1. PatternWe draw it, or clean your file into vectors.
  2. ToolpathBits, depths and passes set for your board.
  3. CarveCut on our 3-axis CNC router.
  4. Sand and sealEdges hand-sanded, board sealed.
  5. PU sprayPrimer and top coat in our spray booth.
  6. Cure and packChecked against the drawing, packed in foam.

[[ Add a 15–30 second workshop video (CNC cutting, then the PU booth) and one photo per step. This is the strongest proof you have. ]]

For architects and interior designers

  • Trade pricing on the same fixed rate card
  • Shade and board sample kit, ₹750, adjusted on your first order
  • Your client patterns stay yours. We never sell them in the shop.
WhatsApp